top of page

UFE Services

Comprehensive range of blower products for air and gas applications.

Blower Vac Packs.jpg

Blower Vacuum Pumps

Fully silenced packages, designed and manufactured in Australia (typically 68-78 dBa @1 metre) 



Blower/Vacuum pump Tri-lobe low pulse design with inbuilt pulsation dampener

Full Spare Parts/Service/Overhaul support

SN Standard Range.jpg

SN (Standard Range)

Flows 30 - 10,200 m3/hour

Pressures to 1.1 Bar (16 psig)

Vacuum to 50% (15” HG)

TS Truck Series.jpg

TS Truck Series

Flows 300-1,700 m3/hour

Pressures to 1.5 Bar (20 psig)

Vacuum to 50% (15” HG)

SIAV High Vacuum.jpg

SIAV High Vacuum

Flows 300-9,000 m3/hour

Pressures to 1 Bar (15 psig)

Vacuums to 93% (28” Hg)

Multistage Centrifugal Blowers.jpg

Multistage Centrifugal Blowers

Flows 9,000 - 51,000 m3/hour

Pressures to 1 Bar (15 psig)

Vacuums to 50% (15” Hg)

Process Blowers.jpg

Process Blowers

Flows 25,000 m3/hour

Pressures to 1.8 Bar (26 psig)

Vacuums to 50% (15” Hg)

Special designs to suit most gases.

Oil Free Screw Compressors.jpg

Oil Free Screw Compressors

Flows 340 - 85,000 m3/hour

Pressures to 3.5 Bar (46 psig)

Vacuums to 50% (15” Hg)

Side Channel (Ring) Blowers.jpg

Side Channel (Ring) Blowers/Vacuum Pumps

Flows to 1400 m3/hour

Pressures to 0.35 Bar (5.5 psig)

Vacuums to 25% (7” Hg)

Silent Flow.jpg

Silent Flow

The Silencer - Suction Filter
This device combines the functions of sound attenuation and filtration. The centrally positioned cartridge guarantees that the gas being conveyed remains free of contamination in the event of the absorbent lining of the silencer being destroyed.

The Silencer Base
Resting on anti-vibration mounts that filter out dynamic forces, supports the suction filter, blower and motor assembly. The design is all metal to ensure broad spectrum sound attenuation without any risk of polluting the downstream process.

The Discharge Assembly
Comprising a reversible pipe equipped with a works-calibrated safety valve and an isolatable pressure gauge, and finally fitted with a non-return valve and a flexible connector. As an option, a vacuum starting valve can be supplied.

Starting Valve
Not necessary for blowers fitted with frequency variation motors, this device is recommended for blowers driven by electric motors controlled by a star-delta starter.

Non-Return Valve
Made of aluminum and silicon these valves are totally corrosion-proof. The full bore minimizes pressure losses.

Oil Change
The blowers come with an oil change system consisting of two plugs with internal pistons and safety caps (one per housing). A drainpipe is also supplied with the blower. It is attached to the silencer base by means of a flexible attachment.

Truck Discharge Blower Assembly.jpg

Truck Discharge Blower Assembly

Compact, quiet & complete

Ready To Connect To Diesel / Petrol Engine.

Incorporates the renowned HIBON SC7S truck blower in use throughout the world.

Hundreds in use in Australia and New Zealand.

For stockfeeds, plastics, flour, sugar, cement, lime & most powered or granular pneumatic and tipper application.

350 - 735 CFM (595 - 1250 M3/HOUR)

To 17.5 PSIG (1.2 BAR Gauge)

bottom of page